Suppress Zeros in Dimensions

Up a level to ..

Display Lateral Tolerances

 

Annotate Drawings > Dimensions and Tolerances > Use Dimension Styles > Control Dimension Values > 

Suppress Zeros in Dimensions

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To display dimension value in sub units

1. Click Home tabAnnotation panelDimension Style. Enter dimstyle at the command prompt.
2. In the Dimension Style Manager, select the style you want to change. Click Modify.
3. In the Modify Dimension Style dialog box, Primary Units tab or Alternate Units tab, under Zero Suppression, select Leading.
   • Sub-units factor: Sets the number of sub units to a unit. It is used to display the dimension distance in a sub unit, for distances less than one unit. For example, enter 100 if the suffix is m and the sub-unit suffix is to display in cm.
   • Sub-units suffix: Includes a suffix to the dimension text sub unit. You can enter text or use control codes to display special symbols. For example, enter cm to for .96m to display as 96cm.
4. Click OK.
5. Click Close to exit the Dimension Style Manager.

 Toolbar: Dimension or Styles 

 Command entry: DIMSTYLE