Create a Solid Wedge

Up a level to ..

Create a Solid Wedge

 

Work with 3D Models > Create 3D Models > Create 3D Solids and Surfaces > Create 3D Solid Primitives > 

Create a Solid Wedge

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To create a solid wedge based on a center point, corner of base, and height

1. Click Home tabModeling panelWedge.At the Command prompt, enter wedge.
2. At the Command prompt, enter c (Center). Specify the center point of the base.
3. To set the location of a corner of the base, use one of the following methods:
   • To set the length and width simultaneously: Specify the location of one corner of the base.
   • To set the length and width separately: At the Command prompt, enter l (Length) and specify the length. Then specify the width.
4. Specify the height of the wedge.

 Toolbar: Modeling 

 Command entry: WEDGE