Add a Scale Action

Up a level to ..

Add a Scale Action

 

Create and Modify Objects > Create and Use Blocks (Symbols) > Add Dynamic Behavior to Blocks > Add Actions and Parameters to Dynamic Blocks > Add Actions to Dynamic Blocks > 

Add a Scale Action

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To add a scale action to a dynamic block definition

1. Click Insert tab Block panel Block Editor. At the Command prompt, enter bedit.
2. Click Block Editor tab Action Parameters panel Scale.In the Block Editor, in the Block Authoring Palettes window, Actions tab, click the Scale Action tool.
3. In the Block Editor drawing area, select one of the following parameters to associate with the action:
   • Linear
   • Polar
   • XY
4. Select the geometry (the selection set) to associate with the action. Press Enter.
5. (Optional) Follow the Command prompts to specify the type of base point.
6. Specify the location of the action.
   NoteThe action location in the block definition has no effect on the appearance or functionality of the block reference.
7. Click Block Editor tab Open/Save panel Save Block. At the Command prompt, enter bsave.
8. If you are finished using the Block Editor, click Close Block Editor.

 Toolbar: Standard 

 Command entry: BACTION