Walk and Fly Through a Drawing

Up a level to ..

Walk and Fly Through a Drawing

 

Control the Drawing Views > Use Viewing Tools > Specify 3D Views > 

Walk and Fly Through a Drawing

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To specify Walk or Fly settings

1. Click View menu Walk and Fly Walk and Fly Settings.At the Command prompt, enter walkflysettings.
2. In the Walk and Fly Settings dialog box, under Settings, click the button next to a display option.
3. In the Display Position Locator Window option, clear the check box if you do not want to display the window.
   NoteIf performance slows when this window is displayed, you may want to close the Position Locator window.
4. In the Current Drawing Settings section, under Walk/Fly Step Size, enter a number to set the step size in drawing units.
5. In the Steps Per Second option, enter a number between 1 and 30.
6. Click OK.

 Command entry: WALKFLYSETTINGS

 Toolbar: 3D Navigation, Walk and Fly