| ID | Name | Meaning |
|---|---|---|
| 1 | Site No. | Number of the site where the faulty board or module is located Value range: 0-2047 |
| 2 | Board Type | Number of the type which the faulty board belongs to. 67:DATU 98:GATM |
| 3 | Board No. | Number of the fault board 0-35:DATU/GATM |
| 4 | PassNo | Number of the passage where the faulty board is located. |
| 5 | SubLink No. | Alarm sub-category number 0:RET antenna communication alarm 1 1:RET antenna communication alarm 2 2:RET antenna communication alarm 3 … 35:RET antenna communication alarm 35 |
| 6 | Cell Index | Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None |
| 7 | Site Type | Type of the site where the faulty board is located. 12:BTS3012; 13:BTS3006C; 14:BTS3002E; 15:BTS3012AE; 16:BTS3012 II; 17:DBS3900 GSM; 18:BTS3900 GSM; 19:BTS3900A GSM; |
| 8 | RackNo | Number of the rack where the faulty board is located. |
| 9 | BoxNo | Number of the subrack where the faulty board is located. |
| 10 | SlotNo | Number of the slot where the faulty board is located. |
| 11 | Site Name | Site Name |
| 12 | Alarm Attribute | Alarm Character 0:Normal 1:Transient Count |
If the RET antenna is not initialized or the configuration data of the RET antenna is lost, the RET antenna cannot work properly.
The RET antenna is not initialized or the configuration data of the RET antenna is lost.
Load the configuration file of the RET antenna in the LMT and check whether the alarm is cleared.
Y=> The alarm is cleared. The alarm handling is complete.
N=> Go to Step 2.
Y=>The alarm is cleared. Alarm handling is complete.
N=>Go to Step 3.
Y=>The alarm is cleared. Alarm handling is complete.
N=>The alarm is not cleared. Please contact Huawei Customer Service Center.