ALM-11792 GPS receiver work mode configuration error alarm

Description

When the GPS receiver work mode configuration is inconsistent with the GPS receiver type, the alarm occurs.

Alarm ID	Alarm Severity	Alarm Type
11792	Minor	Fault

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 99:DGPS
3	Board No.	Number of the fault board 0-35:DGPS
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 255:None
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board is located. 12:BTS3012; 15:BTS3012AE; 16:BTS3012 II;
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

The GPS receiver cannot work properly.

None.

The configuration and physical type of the GPS or RGPS are inconsistent.

Check the configuration of the GPS or Glonass, and the physical type of the GPS receiver.
1. Check whether the configuration of the GPS or Glonass, and the physical type of the GPS receiver are consistent.
  Y=> Go to step 2;
  
  N=> Go to step b.
2. Reconfigure the work mode of the receiver as GPS or Glonass, and then check whether the alarm is cleared.
  Y=> The alarm handing ends;
  
  N=> Go to step 2.
Replace the DGPS board, and then check whether the alarm is cleared.
Y=> The alarm handing ends;

N=> Contact Huawei Customer Service Center.