| ID | Name | Meaning |
|---|---|---|
| 1 | DPCGROUP | DPCGROUP of the unblock circuit that is not configured |
| 2 | CicNum | Numbers of Circuit identification code (CIC) of the unblock circuits those are not configured |
| 3 | CIC | Circuit identification code (CIC) of the unblock circuit that is not configured |
| 4 | OSP | Original signaling point (OSP) of the subrack where the unblock circuit is located |
| 5 | Alarm Attribute | 0=Normal, Alarms period are longer than the Transient Threshold. 1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN". |
The state of the circuit in the BSC is inconsistent with that in the MSC, causing a decrease in available circuit resources.
Y => Refer to the handling suggestions for clearing E1/T1 alarms.
No => Please contact Huawei Customer Service Center.