| ID | Name | Meaning |
|---|---|---|
| 1 | Subrack No. | Subrack No. |
| 2 | Slot No. | Slot No. |
| 3 | Cpu No. | CPU No. |
| 4 | Tributary Unit No. | 0 - 62(for E1 mode), 0 - 83(for T1 mode). |
| 5 | Site No. | The IDs of all sites whose OMLs are on the faulty E1/T1. If BTS are cascade connected,a maximum of 4 sites are shown.Only Abis E1/T1 alarm has this parameter. |
| 6 | Site Name | The Names of all sites whose OMLs are on the faulty E1/T1. If BTS are cascade connected,a maximum of 4 sites are shown.Only Abis E1/T1 alarm has this parameter. |
| 7 | Alarm Attribute | 0=Normal, Alarms period are longer than the Transient Threshold. 1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN". |
No signal is detected between the peer equipment (BTS or BSC) and the transmission equipment, whereas the transmission equipment is normally connected with the local equipment.
Y => The alarm is cleared. The alarm handling is complete.
N => The alarm persists. Please contact Huawei Customer Service Center.