20427 Abnormal PDB Output Switch Sensor

The number of the subrack

0=0(Powerbox Monitor)

0=Powerbox Output Switch One,1=Powerbox Output Switch Two,2=Powerbox Output Switch Three,3=Powerbox Output Switch Four,4=Powerbox Output Switch Five,5=Powerbox Output Switch Six,6=Powerbox Output Switch Seven,7=Powerbox Output Switch Eight,8=Powerbox Output Switch Nine,9=Powerbox Output Switch Ten,10=Powerbox Output Switch Eleven,11=Powerbox Output Switch Twelve,12=Powerbox Output Switch Thirteen,13=Powerbox Output Switch Fourteen,14=Powerbox Output Switch Fifteen,15=Powerbox Output Switch Sixteen,16=Powerbox Output Switch Seventeen,17=Powerbox Output Switch Eighteen,18=Powerbox Output Switch Nineteen,19=Powerbox Output Switch Twenty

0=On,1=Off

0=Normal, Alarms period are longer than the Transient Threshold.

1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN".