21031 Remote Upgrade Not Completed

Description

This alarm is generated when the remote upgrade is not completed. After the remote upgrade is completed, the alarm is automatically cleared.

Attribute

Alarm ID	Alarm Severity	Alarm Type
21031	Critical	Fault

Parameters

ID	Name	Meaning
1	Alarm Attribute	0=Normal, Alarms period are longer than the Transient Threshold. 1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN".

Name

Meaning

Alarm Attribute

0=Normal, Alarms period are longer than the Transient Threshold.

1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN".

Impact on the System

None.

System Actions

None.

Possible Causes

The remote upgrade is not completed.

Procedure

Check whether the remote upgrade is not completed.
Y => Finish the remote upgrade. Go to 2.

N => Contact Huawei Customer Service Center.
Check whether the alarm is cleared.
Y => The alarm handling is cleared.

N => Contact Huawei Customer Service Center.