| ID | Name | Meaning |
|---|---|---|
| 1 | Site No. | Number of the site where the faulty board or module is located Value range: 0-2047 |
| 2 | Board Type | Number of the type which the faulty board belongs to. 129:TMU |
| 3 | Board No. | Number of the fault board 0:TMU |
| 4 | PassNo | Number of the passage where the faulty board is located. |
| 5 | SubLink No. | Alarm sub-category number 0:air conditioner 1:heat exchanger |
| 6 | Cell Index | Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None |
| 7 | Site Type | Type of the site where the faulty board or module is located 3: BTS30A |
| 8 | RackNo | Number of the rack where the faulty board is located. |
| 9 | BoxNo | Number of the subrack where the faulty board is located. |
| 10 | SlotNo | Number of the slot where the faulty board is located. |
| 11 | Site Name | Site Name |
| 12 | Alarm Attribute | Alarm Character 0:Normal 1:Transient Count |
This alarm might cause abnormal ambient temperature of the BTS and affect normal operation of it.
Check whether the BTS is powered down. If yes, resume supplying power to it. Check whether the alarm is cleared.
Y=> The alarm handling ends.
N=> Go to Step 2.
If the BTS is not powered down, go to Step [2].
Replace the cable between the air conditioner or heat exchanger and the backplane. Check whether the alarm is cleared.
Y=> The alarm handling ends.
N=> Go to Step 3.
Replace the air conditioner or heat exchanger. Check whether the alarm si cleared.
Y=> The alarm handling ends.