| ID | Name | Meaning |
|---|---|---|
| 1 | Site No. | Number of the site where the faulty board or module is located Value range: 0-2047 |
| 2 | Board Type | Number of the type which the faulty board belongs to. 130:CDU |
| 3 | Board No. | Number of the fault board 0:CDU 0 |
| 4 | PassNo | Number of the passage where the faulty board is located. |
| 5 | SubLink No. | Alarm sub-category number 255:None |
| 6 | Cell Index | Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None |
| 7 | Site Type | Type of the site where the faulty board or module is located 3: BTS30 5: BTS312 10: BTS3012A 11: BTS3006A |
| 8 | RackNo | Number of the rack where the faulty board is located. |
| 9 | BoxNo | Number of the subrack where the faulty board is located. |
| 10 | SlotNo | Number of the slot where the faulty board is located. |
| 11 | Site Name | Site Name |
| 12 | Alarm Attribute | Alarm Character 0:Normal 1:Transient Count |
The corresponding board cannot work normally upon the occurrence of this alarm.
Check whether the configured frequency band of the DDPU is consistent with that of the TRX.
Y=> Please contact Huawei Customer Service Center.
N=> Delete the DDPU and reconfigure a new DDPU to make the frequency band of the new DDPU is consistent with that of the TRX. Then see if the alarm is cleared
Replace the CDU with another frequency band or modify the TRX frequency inconsistent with the CDU frequency band. View whether the alarm is cleared.
Y=> The alarm handling ends.