ALM-2350 Rack Gate Magnetism Alarm

Description

This alarm is triggered when either the cabinet door or the battery door is open.

Alarm ID	Alarm Severity	Alarm Type
2350	Major	Fault

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 85:PMU
3	Board No.	Number of the fault board 0:PMU 0
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 255:None
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board or module is located 10: BTS3012A
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

None.

None.

Check whether the cabinet is open
Y=> Check whether the equipment room and the devices are damaged. Repair them if any damaged. The alarm handling ends if the alarm is cleared after the repair.

N=> Go to Step 2.
Check whether the battery door is open.
Y=> Check whether the battery is damaged. Repair it if damaged. The alarm handling ends if the alarm is cleared after the repair.

N=> Go to Step 3.
Check the magnetism sensor and the cable connecting to the magnetism sensor.
Replace the magnetism sensor or the connection cable if faulty. View whether the alarm is cleared.

Y=> The alarm handling ends.

N=> Please contact Huawei Customer Service Center.