ALM-2430 Fifteenth Extended I/O Alarm

Description

This alarm is reported when the 15th extended I/O is abnormal. To enable the users to obtain the required alarm information, the LMT alarm system provides “** extended I/O alarm” and “EAC extended ** alarm”. This facilitates the users to define alarms themselves.

Attribute

Alarm ID	Alarm Severity	Alarm Type
2430	Warning	Fault

Parameters

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 13:EAC
3	Board No.	Number of the fault board 0:EAC0
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 255:None
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board is located. 3: BTS30 5: BTS312 10: BTS3012A 11: BTS3006A
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

Impact on the System

The corresponding equipment to the 15th extended I/O cannot be monitored.

System Actions

None.

Possible Causes

The 15th extended I/O is damaged.

Procedure

Check the 15th extended I/O. See if the alarm is cleared.

Y=> The alarm is cleared. Alarm handling is completed.

N=> The alarm is not cleared. Please contact Huawei Customer Service Center.