ALM-3188 UPS Failed alarm

Description

This alarm is triggered when the UPS DC/AC inverter part or the fan of UPS is faulty.

Attribute

Alarm ID Alarm Severity Alarm Type
3188 Major Fault

Parameters

ID Name Meaning
1 Site No.

Number of the site where the faulty board or module is located

Value range: 0-2047

2 Board Type

Number of the type which the faulty board belongs to.

129:MMU

3 Board No.

Number of the fault board

0:MMU

4 PassNo

Number of the passage where the faulty board is located.

5 SubLink No.

Alarm sub-category number

255:None

6 Cell Index

Index of the cell where the board or module is located

0-2047: Cell index of the faulty cell in the data configuration

65535: None

7 Site Type

Type of the site where the faulty board or module is located

7: BTS3001C-108/BTS3001C-116

8: BTS3001C-204

8 RackNo

Number of the rack where the faulty board is located.

9 BoxNo

Number of the subrack where the faulty board is located.

10 SlotNo

Number of the slot where the faulty board is located.

11 Site Name

Site Name

12 Alarm Attribute

Alarm Character

0:Normal

1:Transient Count

Impact on the System

When this alarm occurs, the UPS is abnormal. In this case, if the mains supply fails, BTS3001C cannot provide normal services.

System Actions

None.

Possible Causes

  • The DC/AC part fails.
  • The fan fails.

Procedure

  1. Contact the UPS supplier and check whether the UPS detection circuit is normal.

    Y=>Contact the UPS supplier for UPS repair. The alarm handling ends.

    N=>The possible cause is that the hardware in the BTS3001C is faulty.Please contact Huawei Customer Service Center.


Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.