ALM-3826 Fire Alarm

Description

This alarm is reported through the alarm board when the fire alarm index is detected abnormal.

Alarm ID	Alarm Severity	Alarm Type
3826	Critical	Fault

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 13:EAC
3	Board No.	Number of the fault board 0:EAC0
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 255:None
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board or module is located 9: BTS3002C
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

The environment safety of the system has hidden trouble.

None.

The environment of the equipment is poor.
All the things where the equipment is in burn out.
The circuit between the external signal interference sensor and the alarm board is faulty.
Data configuration is incorrect.

Check the environment in time and decide whether to report the alarm to the relevant department or not.
Y=>Go to Step 2.

N=>Go to Step 3.
Report the alarm to relevant department.
Check if the environment meets the detection standards.
Y=>Go to Step 5.

N=>Go to Step 4.
Improve the environment.
Check if the circuits and sensor work normally.
Y=>Go to Step 6.

N=>Go to Step 7.
Check the data configuration.
Check the data configuration and ensure that it is correct. Alarm handling is completed.
Handling problems in the circuit and sensor.