ALM-3830 Guard Against Theft Alarm

Description

This alarm is reported when the equipment room is intruded.

Attribute

Alarm ID Alarm Severity Alarm Type
3830 Critical Fault

Parameters

ID Name Meaning
1 Site No.

Number of the site where the faulty board or module is located

Value range: 0-2047

2 Board Type

Number of the type which the faulty board belongs to.

13:EAC

3 Board No.

Number of the fault board

0:EAC0

4 PassNo

Number of the passage where the faulty board is located.

5 SubLink No.

Alarm sub-category number

255:None

6 Cell Index

Index of the cell where the board or module is located

0-2047: Cell index of the faulty cell in the data configuration

65535: None

7 Site Type

Type of the site where the faulty board is located.

9: BTS3002C

8 RackNo

Number of the rack where the faulty board is located.

9 BoxNo

Number of the subrack where the faulty board is located.

10 SlotNo

Number of the slot where the faulty board is located.

11 Site Name

Site Name

12 Alarm Attribute

Alarm Character

0:Normal

1:Transient Count

Impact on the System

None.

System Actions

None.

Possible Causes

The equipment room has intruders.

Procedure

  1. Use one of the following methods:

    Send the smog and anti-theft alarm clearance commands through the LMT.

    Send the EAC reset command through the LMT.

    Reset the alarm box in the near end.

    Reset the BTS.


Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.