| ID | Name | Meaning |
|---|---|---|
| 1 | Site No. | Number of the site where the faulty board or module is located Value range: 0-2047 |
| 2 | Board Type | Number of the type which the faulty board belongs to. 85:APM |
| 3 | Board No. | Number of the fault board 0:PMU0 |
| 4 | PassNo | Number of the passage where the faulty board is located. |
| 5 | SubLink No. | Alarm sub-category number 255:None |
| 6 | Cell Index | Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None |
| 7 | Site Type | Type of the site where the faulty board is located. 9: BTS3002C |
| 8 | RackNo | Number of the rack where the faulty board is located. |
| 9 | BoxNo | Number of the subrack where the faulty board is located. |
| 10 | SlotNo | Number of the slot where the faulty board is located. |
| 11 | Site Name | Site Name |
| 12 | Alarm Attribute | Alarm Character 0:Normal 1:Transient Count |
The single-phase AC mains supply is input to the APM. The APM internal power monitoring module monitors the AC voltage. This alarm will be generated when the voltage is higher than the threshold.
Y=>Go to Step 4.
N=>Go to Step 5.
The AC power supply network and the cable connection in the equipment room are faulty. Please check on site and clear the faulty.
Y=>Alarm handling is completed.
Y=>Alarm handling is completed.