4736 Extended TMU clock alarm

Description

The alarm is triggered when the clock module on the active TMU is faulty.

Alarm ID	Alarm Severity	Alarm Type
4736	Warning	Fault

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 64:DTMU/DOMU 87:GTMU
3	Board No.	Number of the fault board 0-5:DTMU/GTMU
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 255:None
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board is located. 3:BTS30; 5:BTS312; 10:BTS3012A; 11:BTS3006A; 12:BTS3012; 13:BTS3006C; 14:BTS3002E; 15:BTS3012AE; 16:BTS3012 II; 17:DBS3900 GSM; 18:BTS3900 GSM; 19:BTS3900A GSM;
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

The BTS services will not be affected upon occurrence of this alarm if the active clock is normal.

The system will automatically initiate an active/standby clock module switchover.

The clock module is faulty.

Reset the standby TMU
Reset the standby TMU and check whether the alarm is cleared.

Y=> The alarm handling ends.

N=> Go to Step 2.
Replace the standby TMU
Replace the standby TMU[/#2011] and check whether the alarm is cleared.
Y=> The alarm handling ends.

N=> Please contact Huawei Customer Service Center.