| ID | Name | Meaning |
|---|---|---|
| 1 | Site No. | Number of the site where the faulty board or module is located Value range: 0-2047 |
| 2 | Board Type | Number of the type which the faulty board belongs to. 64:DTMU/DOMU 87:GTMU |
| 3 | Board No. | Number of the fault board 0-5:DTMU/GTMU |
| 4 | PassNo | Number of the passage where the faulty board is located. |
| 5 | SubLink No. | Alarm sub-category number 255: None |
| 6 | Cell Index | Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None |
| 7 | Site Type | Type of the site where the faulty board is located. 12:BTS3012; 13:BTS3006C; 14:BTS3002E; 15:BTS3012AE; 16:BTS3012 II; 17:DBS3900 GSM; 18:BTS3900 GSM; 19:BTS3900A GSM; |
| 8 | RackNo | Number of the rack where the faulty board is located. |
| 9 | BoxNo | Number of the subrack where the faulty board is located. |
| 10 | SlotNo | Number of the slot where the faulty board is located. |
| 11 | Site Name | Site Name |
| 12 | Alarm Attribute | Alarm Character 0:Normal 1:Transient Count |
The extension link and extension cabinet group on the incompatible E1 port cannot work normally when this alarm is generated.
Incompatible E1 port number is used when configuring extension links or internal cascading of the site.
Observe whether the alarm is cleared after the modification.
Y=> The alarm is cleared. Alarm handling is complete.
N=> The alarm is not cleared. Please contact Huawei Customer Service Center.
Observe whether the alarm is cleared after the replacement.
Y=>The alarm is cleared. Alarm handling is complete.
N=> The alarm is not cleared. Please contact Huawei Customer Service Center.