ALM-4934 Transmit Mode Error Alarm

Description

The transmission mode configured on the SMT or BSC LMT is inconsistent with the optical transmission mode configured on the DMCM module.

Alarm ID	Alarm Severity	Alarm Type
4934	Major	Fault

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 64:DOMU
3	Board No.	Number of the fault board 0-7:DOMU
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 255: None
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board is located. 13:BTS3006C; 14:BTS3002E;
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

Communication between the extension cabinet and the BSC is interrupted.

None.

The transmission mode set in the LMT is not consistent with the actual mode.

Set the transmission mode to E1 transmission mode in the LMT, or replace the DMCM. Check whether the alarm is cleared.
Y=> The alarm is cleared. Alarm handling is completed..

N=> The alarm is not cleared. Go to Step 2.
Replace the DMCM and check whether the alarm is cleared.
Y=>The alarm is cleared. Alarm handling is completed.

N=>The alarm is not cleared. Please contact Huawei Customer Service Center.