ALM-4940 Site Energy Conservation Alarm

Description

If the energy conservation time starts, the power of the DDRM is shut down, and this alarm is reported.

Attribute

Alarm ID Alarm Severity Alarm Type
4940 Warning Fault

Parameters

ID Name Meaning
1 Site No.

Number of the site where the faulty board or module is located

Value range: 0-2047
2 Board Type

Number of the type which the faulty board belongs to.

64:DOMU
3 Board No.

Number of the fault board

0-7:DOMU
4 PassNo

Number of the passage where the faulty board is located.
5 SubLink No.

Alarm sub-category number

255: None
6 Cell Index

Index of the cell where the board or module is located

0-2047: Cell index of the faulty cell in the data configuration

65535: None
7 Site Type

Type of the site where the faulty board is located.

13:BTS3006C;

14:BTS3002E;
8 RackNo

Number of the rack where the faulty board is located.
9 BoxNo

Number of the subrack where the faulty board is located.
10 SlotNo

Number of the slot where the faulty board is located.
11 Site Name

Site Name
12 Alarm Attribute

Alarm Character

0:Normal

1:Transient Count

Impact on the System

The services are interrupted during energy conservation.

System Actions

None.

Possible Causes

The energy conservation function is set.

Procedure

  1. When the every conservation time is over, check whether the alarm automatically disappears and the site works normally.

    Y=> The alarm is cleared. Alarm handling is completed.

    N=>The alarm is not cleared. Please contact Huawei Customer Service Center.

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.