ALM-6020 Door Alarm

Description

This alarm is reported when the door is opened.

Alarm ID	Alarm Severity	Alarm Type
6020	Major	Fault

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 72:DPMU
3	Board No.	Number of the fault board Value range:0-8:DPMU
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 255: None
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board is located. 12:BTS3012; 13:BTS3006C; 14:BTS3002E; 15:BTS3012AE; 16:BTS3012 II; 17:DBS3900 GSM; 18:BTS3900 GSM; 19:BTS3900A GSM;
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

None.

None.

This alarm is generated when the cabinet which the power system monitors is opened.

Check the status of the cabinet door.
1. Check whether the cabinet door is open:
  Y=> The cabinet door is open. Check whether the equipment room and the equipment are damaged. Repair the equipment room and the equipment if there are any damaged.
  
  N => The cabinet is closed. Go to procedure 2.
Check the door status sensor and the cable connected to the sensor.
1. Check the sensor and the cable.
2. Check whether the sensor or the cable is faulty:
  Y => Go to step c.
  
  N => Contact Huawei Customer Service Center.
3. Replace the faulty sensor or reconnect the sensor cable.
4. Check whether the door status alarm is cleared:
  Y => The alarm is cleared. The alarm handling ends.
  
  N => The alarm is not cleared. Contact Huawei Customer Service Center.