ALM-6166 Parameter set collision alarm

Description

Alarm ID	Alarm Severity	Alarm Type
6166	Warning	Fault

ID	Name	Meaning
1	Site No.	Number of the site where the faulty board or module is located Value range: 0-2047
2	Board Type	Number of the type which the faulty board belongs to. 70:DEMU/EMU
3	Board No.	Number of the fault board Value range:0-8:DEMU/EMU
4	PassNo	Number of the passage where the faulty board is located.
5	SubLink No.	Alarm sub-category number 0: Configuration Data Sending Conflict 1: Relay Parameter Setting Conflict 2: Sensor Alarm Information Clearing Conflict 3: Alarm Suppression/Enabling Setting Conflict 4: Boolean Alarm Level Setting Conflict
6	Cell Index	Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None
7	Site Type	Type of the site where the faulty board is located. 17:DBS3900 GSM; 18:BTS3900 GSM; 19:BTS3900A GSM;
8	RackNo	Number of the rack where the faulty board is located.
9	BoxNo	Number of the subrack where the faulty board is located.
10	SlotNo	Number of the slot where the faulty board is located.
11	Site Name	Site Name
12	Alarm Attribute	Alarm Character 0:Normal 1:Transient Count

None.

None.

The parameter settings of GSM EMU do not match that of UMTS EMU.

If the alarm sub-category number is 0, check whether the GSM -48 V upper and lower alarm thresholds, +24 V upper and lower alarm thresholds, upper and lower alarm thresholds of the temperature sensor, upper and lower alarm thresholds of the humidity sensor, and upper and lower alarm thresholds of external analog sensors 1 to 4 are the same as the UMTS configurations.
If the alarm sub-category number is 1, check whether the status of the GSM relay is the same as that of the UMTS relay.
If the alarm sub-category number is 2, check whether the alarm cleared status of GSM sensors is the same as that of UMTS sensors.
If the alarm sub-category number is 3, check whether the configurations of GSM analog alarms, Boolean alarms, and reserved Boolean alarms are the same as the UMTS configurations.
If the alarm sub-category number is 4, check whether the high level and low level of GSM dedicated Boolean alarms and common Boolean alarms are the same as the UMTS configurations.