| ID | Name | Meaning |
|---|---|---|
| 1 | Subrack No. | The number of the subrack |
| 2 | Logical slot No. | 2=Enviroment Monitor |
| 3 | Port No. | The number of the port that resides in the board |
| 4 | State | 0=Restore,1=Alarm |
| 5 | Alarm Attribute | 0=Normal, Alarms period are longer than the Transient Threshold. 1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN". |
The alarm persists or can be cleared by comparing the detection value (factory value) of the sensor with the actual environment.
Check whether the BSC or the equipment room is in good condition. If no, solve the relevant problems. Check whether the alarm is cleared.
Y => The alarm is cleared. The alarm handling is complete.
N => The alarm persists. Please contact Huawei Customer Service Center.