65375 BSC Custom Environment Alarm42

Description

This alarm is reported when the access control sensor of the environment monitor detects the abnormality of the switch signals.

Attribute

Alarm ID Alarm Severity Alarm Type
65375 Warning Fault

Parameters

ID Name Meaning
1 Subrack No.

The number of the subrack

2 Logical slot No.

2=Enviroment Monitor

3 Port No.

The number of the port that resides in the board

4 State

0=Restore,1=Alarm

5 Alarm Attribute

0=Normal, Alarms period are longer than the Transient Threshold.

1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN".

Impact on the System

A potential risk for the normal operation of the system exists.

System Actions

The alarm persists or can be cleared by comparing the detection value (factory value) of the sensor with the actual environment.

Possible Causes

The sensor connected to the BSC is triggered.

Procedure

  1. Check whether the BSC or the equipment room is in good condition. If no, solve the relevant problems. Check whether the alarm is cleared.

    Y => The alarm is cleared. The alarm handling is complete.

    N => The alarm persists. Please contact Huawei Customer Service Center.


Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.