803 Last Start Failure Alarm

Description

The alarm is reported if system failed to start last time.

Attribute

Alarm ID	Alarm Severity	Alarm Type
803	Minor	Event

Parameters

ID	Name	Meaning
1	start mode last time	0=start from baseline last time,1=start from least config last time,2=start from bin file last time,3=start from database file last time
2	start file name last time	Start file name last time
3	Alarm Attribute	0=Normal, Alarms period are longer than the Transient Threshold. 1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN".

Name

Meaning

start mode last time

0=start from baseline last time,1=start from least config last time,2=start from bin file last time,3=start from database file last time

start file name last time

Start file name last time

Alarm Attribute

0=Normal, Alarms period are longer than the Transient Threshold.

1=Transient Count, The times and the period of the alarms whose periods are shorter than the Transient Threshold are summed up. If the sum result is longer than the Alarm Occurrence Period Threshold or Alarm Occurrence Times Threshold, an alarm so called Transient Count Alarm is triggered. Because Transient Count Alarm is based on accumulative result, the recovery of the alarm may occur at least one Summing Cycle later. The Summing Cycle can be query by MML "LST STATSLDWIN".

Impact on the System

failed to start last time

System Actions

None.

Possible Causes

(1). The database fails to be restored last time.
(2). The database is restored successfully but the service processing module on the OMU fails to be started last time.
Note: If the database fails to be restored (or the database is restored successfully but the service processing module on the OMU fails to be started) for the Nth time and the OMU fails to be started before the database restoration for the (N+1)th time, the alarm is generated when the OMU is started successfully for the (N+2)th time. In this case, the alarm is generated because of the failure for the Nth time rather than the failure for the (N+1)th time.

Procedure

None.