| ID | Name | Meaning |
|---|---|---|
| 1 | Site No. | Number of the site where the faulty board or module is located Value range: 0-2047 |
| 2 | Board Type | Number of the type which the faulty board belongs to. 147:PBU |
| 3 | Board No. | Number of the fault board 0:PBU 0 |
| 4 | PassNo | Number of the passage where the faulty board is located. |
| 5 | SubLink No. | Alarm sub-category number 0:The slot is installed with the TRX, while the configuration at the BSC side is PBU. 1:The PBU frequency band is inconsistent with the corresponding TRX frequency. 2:The slot is installed with the P-PBU, while the configuration at the BSC side is different. 3:The slot is installed with the R-PBU, while the configuration at the BSC side is different. 4:The slot is installed with the D-PBU, while the configuration at the BSC side is different. |
| 6 | Cell Index | Index of the cell where the board or module is located 0-2047: Cell index of the faulty cell in the data configuration 65535: None |
| 7 | Site Type | Type of the site where the faulty board is located. 12:BTS3012; 13:BTS3006C; 14:BTS3002E; 15:BTS3012AE; 16:BTS3012 II; |
| 8 | RackNo | Number of the rack where the faulty board is located. |
| 9 | BoxNo | Number of the subrack where the faulty board is located. |
| 10 | SlotNo | Number of the slot where the faulty board is located. |
| 11 | Site Name | Site Name |
| 12 | Alarm Attribute | Alarm Character 0:Normal 1:Transient Count |
When the alarm occurs, all the services supported by the TRX will be interrupted.
Check the board type by adhering, do as follows:
Right-click the PBU and choose Query Board Information on the shortcut menu.
The board type can be viewed under the corresponding rack from the right pane
The following methods can be applied:
Replace the board according to the configuration at the BSC Data Auto Configuration System.
Reconfigured the board type under the Site Device to match with the board installed.
Y=> The alarm handling ends.