Front Panel of the BSC High-Power Distribution Box

The components on the front panel of the BSC high-power distribution box are the panel of the MDMC and the power switches.

Figure 1 shows the front panel of the BSC high-power distribution box.

Figure 1 Front panel of the BSC high-power distribution box

(1) Panel of the MDMC	(2) RUN LED	(3) ALM LED
(4) Mute switch	(5) Power distribution switches	(6) Label for power distribution switches

NOTE:

For details of the MDMC, refer to PAMU.

CAUTION:

• When turning on or turning off the power distribution switches, you can refer to the label for power distribution switches.
• To disassemble a device, switch off the device, and then disconnect the power cable from the device.

You can determine whether the power distribution box generates an audible alarm by setting the mute switch.

• If you set the mute switch to 1, the power distribution box generates an audible alarm when it detects a fault.
• If you set the mute switch to 0, the power distribution box does not generate an audible alarm when it detects a fault.