Front Panel of the GBAM (C5210)

The components on the front panel of the GBAM are the CD drive, LEDs, ports, and switches.

Figure 1 shows the front panel of the GBAM.

Figure 1 Front panel of the GBAM

Table 1 describes the silkscreens on the front panel of the GBAM.

Table 1 Silkscreens on the front panel of the GBAM

SN

Silkscreen

Description

1

None

CD-ROM drive

2

Power switch

3

Reset switch

4

CRT

The CRT LED indicates the critical alarm information. When the indicator is on (yellow), a critical fault occurs in the system and the system cannot work properly.

5

MJR

The MJR LED indicates the major alarm information. When the indicator is on (yellow), a major fault occurs in the system. Though the system can work properly, its performance deteriorates.

6

MNR

The MNR LED indicates the minor alarm information. When the indicator is on (yellow), a minor fault occurs in the system. The system can still work properly.

7

PWR

The PWR LED indicates the power fault information. When the indicator is on (yellow), the power supply for the system is faulty.

8

Serial port, with an 8-pin RJ45 connector

9

USB port

10

11

2

Indicates the status of the read and write function of hard disk 2. When the LED is green, the read and write function of the hard disk is normal; when the LED is yellow, the read and write function of the hard disk is not normal.

12

1

Indicates the status of the read and write function of hard disk 1. When the LED is green, the read and write function of the hard disk is normal; when the LED is yellow, the read and write function of the hard disk is not normal.

13

ON

Main power LED

14

NIC0/NIC1 LED

15

System ID LED

16

ID switch, used to switch the system ID.

17

None

NMI switch. When the NMI switch is pressed, the GBAM is in the pause state and continues to diagnose faults.


Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.