Configuring the GTNU

This describes how to configure the attributes of the GTNUs through the LMT. The GTNUs are displayed in slots 4 and 5 of each subrack by default on the LMT.

Scenario	BSC initial configuration
Mandatory/Optional	Mandatory

Prerequisite

None.

Preparation

**Table 1** Example of the data negotiated and planned for configuring the GTNU
Parameter	Example	Source
Load Key	Server	BSC internal planning

Procedure

On the BSC6000 Local Maintenance Terminal, right-click GTNU.
Choose Configure Board Attributes from the shortcut menu. A dialog box is displayed, as shown in Figure 1.
Figure 1 Configure Board Attributes dialog box (1)
Set Load Key by referring to Table 1.
Click Finish. The configuration of the GTNU is complete.