Querying the DSP Information

This describes how to query the information of the specified DSP in the GDPUC, GDPUX, or GDPUP. The information to be queried is the chip type, software version, and running status.

Prerequisites

The LMT runs normally.
The communication between the LMT and the BSC is normal.
The communication within the BSC is normal.

Context

If you do not specify the slot number and DSP number, the status of all the DSPs in the specified subrack is queried.
If you enter the slot number but do not enter the DSP number, the status of all the DSPs in the specified slot is queried.
If you enter the DSP number but do not enter the slot number, the command cannot be successfully processed.
If the specified subrack, board, or DSP is not configured, the command cannot be successfully processed.

Procedure

Run the DSP DSPINFO command on the LMT to query the DSP information.