Querying the PDCH

This describes how to query the number of activated PDCHs and the number of occupied PDCHs.

Prerequisites

The LMT runs normally.
The communication between the LMT and the BSC is normal.
The communication between the BSC and the BTS is normal.

Procedure

Run the DSP PDCHNUM command on the LMT to query the number of activated PDCHs and the number of occupied PDCHs.

Parent topic: Maintaining a Cell

Related tasks

Using the Local Maintenance Terminal

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.