This describes how to trace the VGCS message and VBS message on the A/Abis/Um interface on the LMT.
Prerequisites
- The LMT runs normally.
- The communication between the LMT and the BSC is normal.
- The group call service is available in the network.
Context
The group call service consists of Voice Group Call Service (VGCS) and Voice Broadcast Service (VBS).
For details of Tracing Mode, refer to Tracing Modes.
The following description is based on the configuration using the GOMU.
Procedure
- On the Trace & Monitor tab page, choose . A dialog box is displayed, as shown in Figure 1.
- Select the Interface Type, Tracing Mode, and Group Call Type, and enter the Group Call Number.
NOTE: The Group Call Number consists of eight decimal numbers.
- Click OK.
Result
If the operation is successful:
- If the tracing mode is Save on GOMU, the LMT does not display the traced messages. You can review the output file of the traced message. For details, refer to Reviewing Trace Message Files.
- If the tracing mode is Report, a dialog box is displayed, prompting the information of the message tracing task.
If the operation fails, a dialog box is displayed, prompting the possible causes.
Postrequisite
You can double-click a message to view the detailed information.
Right-click the message to be analyzed. The shortcut menu provides the following options:
- Clear Message: Clear the displayed messages.
- Stop Scroll: Stop scrolling the displayed messages.
- Stop Trace: Stop the current tracing task.
- Restart Trace: Restart the tracing task.
- View Task: View the established tracing task.
- Search: Search for the specified character string in the displayed messages.
- Save Selection: Save the selected messages.
- Save All: Save all the traced messages.