Querying the TRX Power Mode

This describes how to query the current power mode and the maximum power mode of TRXs.

Prerequisites

Procedure

• Through GUI
  1. Choose BTS Maintenance > Maintain TRX > Query Power Mode. A dialog box is displayed, as shown in Figure 1.
     Figure 1 Query Power Mode dialog box
     
     

  2. Set the parameters in the Location area. Select the TRXs in the Candidate TRXs box and add them to the Selected TRXs box. Click Query. The results are displayed in the lower area, as shown in Figure 2.
     Figure 2 Querying the power mode
     
     

• Through MML
  1. Run the DSP TRXPWM command on the Local Maintenance Terminal to query the TRX power mode.