Setting MML Command Timeout Parameters

This describes how to set MML Command Timeout (s).

Prerequisites

The Local Maintenance Terminal runs normally.
The communication between the LMT and the BSC is normal.

Context

The MML Command Timeout (s) refers to the timeout of the communication between the server and Local Maintenance Terminal through the MML command. If the Local Maintenance Terminal cannot receive the response from the server within the MML Command Timeout (s), a message prompts.

Procedure

Choose System > Command Timeout Setting. A dialog box is displayed, as shown in Figure 1.
Figure 1 Command Timeout Setting dialog box
Set MML Command Timeout (s), and then click OK. The MML Command Timeout (s) is set.