Add Ater Signaling Link(ADD ATERSL)

Function

A configuration command that adds an Ater signaling link.

Note

1. The Ater signaling link can be configured only when the GTCS subrack is configured in the remote subrack.

2. Before configuring the signaling link, you must configure the Ater connection path first.

3. For the single GEIUT/GOIUT board in the BM subrack, the time slots used for Ater signaling link cannot be more than eight.

4. The CongestionStart of the Ater signaling link must be higher or equal to the CongestionEnd.

Parameters

ID	Name	Description
ATERPIDX	Ater Connection Path Index	Meaning:Ater Connection Path Index Value range:0~254 Explanation:This parameter specifies the index of an Ater connection path. Default value:None
TSNO	Timeslot No.	Meaning:Timeslot No. Value range:1~31 Explanation:This parameter specifies the E1/T1 timeslot number of the LAPD link. Default value:None
TNMODE	Transmission Mode	Meaning:Transmission Mode Value range:TRRS(Terrestrial Transmission),SATEL(Satellite Transmission) Explanation:This parameter specifies whether the LAPD link is a satellite link. The signaling link is categorized into satellite link and non-satellite link. Satellite transmission: The satellite link is used. Terrestrial transmission: The non-satellite link is used. Default value:TRRS
CGST	Congestion Start Threshold	Meaning:Congestion Start Threshold Value range:30~100 Explanation:This parameter specifies the congestion start threshold of the LAPD link. Default value:90
CGET	Congestion End Threshold	Meaning:Congestion End Threshold Value range:20~90 Explanation:This parameter specifies the congestion end threshold of the LAPD link. Default value:60
WS	Window Size	Meaning:Window Size Value range:1~127 Explanation:This parameter specifies the window size of the Ater signaling link.If the transmission mode is terrestrial transmission, the default value is 16. Default value:16
WS	Window Size	Meaning:Window Size Value range:1~127 Explanation:This parameter specifies the window size of the Ater signaling link.If the transmission mode is satellite transmission, the default value is 48. Default value:48

Example

Add an Ater signaling link (Ater Connection Path Index = 0; Timeslot No. = 10; Transmission Mode = TRRS(Terrestrial Transmission)):
ADD ATERSL: ATERPIDX=0, TSNO=10, TNMODE=TRRS;