Add Pb Signaling Link(ADD PBSL)

Function

A configuration command that adds a signaling link on the Pb interface.

Note

1. On a specified port in a specified slot of a specified subrack on the Pb interface, you can configure the signaling link only after an E1/T1 link is configured and the E1/T1 link has idle timeslots.

2. The value of Congestion Start Threshold must be greater than the value of Congestion End Threshold.

Parameters

ID	Name	Description
SRN	Subrack No.	Meaning:Subrack No. Value range:0~11 Explanation:This parameter indicates the subrack number of the Pb Signaling Link. Default value:None
SN	Slot No.	Meaning:Slot No. Value range:0~27 Explanation:This parameter indicates the slot number of the Pb Signaling Link. Default value:None
PN	Port No.	Meaning:Port No. Value range:0~83 Explanation:This parameter specifies the E1/T1 port number of the Pb Signaling Link. Default value:None
TSNO	Timeslot No.	Meaning:Timeslot No. Value range:1~31 Explanation:This parameter specifies the E1/T1 timeslot number of the Pb Signaling Link. Default value:None
TEI	TEI	Meaning:TEI Value range:0~127 Explanation:This parameter specifies the terminal equipment identifier on the link layer. Default value:63
CGST	Congestion Start Threshold	Meaning:Congestion Start Threshold Value range:30~100 Explanation:This parameter specifies the congestion start threshold of the Pb Signaling Link. Default value:90
CGET	Congestion End Threshold	Meaning:Congestion End Threshold Value range:20~90 Explanation:This parameter specifies the congestion end threshold of the Pb Signaling Link. Default value:60

Example

1. Add a signaling link on the Pb interface (Subrack No. = 0; Slot No. = 24; Port No. = 0; Timeslot No. = 5; TEI = 63; Congestion Start Threshold = 80; Congestion End Threshold = 70):
ADD PBSL: SRN=0, SN=24, PN=0, TSNO=5, TEI=63, CGST=80, CGET=70;