Add SGSN(ADD SGSN)

Function

A configuration command that adds an SGSN.

Note

This command can be run only when the built-in PCU is configured in the BSC.

Parameters

ID	Name	Description
SGSNNAME	SGSN Name	Meaning:SGSN Name Value range:1-20 characters Explanation: This parameter specifies the SGSN name. Default value:None
IPADDR1	IP Address1	Meaning:IP Address1 Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the local address 1. Default value:None
IPADDR2	IP Address2	Meaning:IP Address2 Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the local address 2. Default value:None
IPADDR3	IP Address3	Meaning:IP Address3 Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the peer address 1. Default value:None
IPADDR4	IP Address4	Meaning:IP Address4 Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the peer address 2. Default value:None

Example

1. Add an SGSN (SGSN Name = sgsn; IP Address1 = 1.1.1.1):
ADD SGSN: SGSNNAME="sgsn", IPADDR1="1.1.1.1";
2. Add an SGSN (SGSN Name = sgsn2; IP Address1 = 1.1.1.1; IP Address2 = 2.2.2.2):
ADD SGSN: SGSNNAME="sgsn2", IPADDR1="1.1.1.1", IPADDR3="2.2.2.2";