Query Test Battery of BTS(DSP BTSBATTTST)

Function

An OM command that queries the result of the BTS battery test.

Note

1. The BSC must communicate properly with the BTS.

2. The BTS is configured with the battery equipment.

Parameters

ID	Name	Description
IDXTYPE	Index Type	Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None
STIDX	Site Index	Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None
STNAME	Site Name	Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None
SRN	Subrack No.	Meaning: subrack number Value range: 0-53 Explanation: This parameter specifies the number of the subrack in which the BTS power module is located. The subrack number is unique in a BTS. Default value: None
SN	Slot No.	Meaning: slot number Value range: 0-23 Explanation: This parameter specifies the number of the slot that holds the BTS power module. Default value: None

Example

Query the battery test result (Index Type = BYIDX(By Index); Site Index = 0; Subrack No. = 0; Slot No. = 15):
DSP BTSBATTTST: IDXTYPE=BYIDX, BTSIDX=0, SRN=0, SN=15;
The result is as follows:
+++    HUAWEI        2008-01-12 17:05:29
O&M    #1320
%% DSP BTSBATTTST: IDXTYPE=BYIDX, BTSIDX=0, SRN=0, SN=15;%%
RETCODE = 0  Execution succeeded

Test No.             1
Test Type       Simple test
Starting Time of the Test       2008-01-12 17:05
Test Result           Successful   
Battery Efficiency           50
Discharging Interval           15
Final Voltage of Discharging       20
Average Discharging Current       2.5
Total AH of Discharge           23
Power Cabinet Temperature         35
Test End Reason       Ended manually


---    END

Output Description

Domain Name	Description
Test No.	Test number
Test Type	Value range: Manual Test, Automatic test after AC input failure, Timed automatic test, Simplified test, Without test
Starting Time of the Test	Start time of the test
Test Result	Value range: Without result, Battery operation normal, Battery operation caution in advance, Battery alarm
Battery Efficiency	Battery efficiency
Discharging Interval	Discharging interval
Final Voltage of Discharging	Final voltage of discharging
Average Discharging Current	Average discharging current
Total AH of Discharge	Total AH of discharging
Power Cabinet Temperature	Power cabinet temperature
Test End Reason	Value range: Battery voltage lower than the set final voltage, Exceed test duration, Automatic test after AC input failure stop due to AC input recovery, Manual stop, Stop due to failure alarm