Display OIU Port Timeslot Loopback Attributes(DSP OPTTS)

Function

An OM command that queries the loopback properties of OIU port timeslots.

Note

None.

Parameters

ID	Name	Description
SRN	Subrack No.	Meaning: subrack number Value range: 0-11 Explanation: The subrack number uniquely identifies a subrack. Default value: None
SN	Slot No.	Meaning: slot number Value range: 0-27 Explanation: The subrack number and slot number uniquely identify a board in a subrack. Default value: None
SUBBRDN	Sub-board No.	Meaning: sub-board number Value range: 0 Explanation: The sub-board number uniquely identifies a sub-board on a board. Default value: 0
PN	Port No.	Meaning: port number Value range: E1: 0-62; T1: 0-83 Explanation: The port number uniquely identifies a port on a board. Default value: None

Example

Query the loopback properties of all the timeslots (Subrack No. = 0; Slot No. = 18; Port No. = 0):
DSP OPTTS:SRN=0, SN=18,PN=0;
The result is as follows:
+++    HUAWEI        2008-08-08 10:00:59
O&M    #49797
%%DSP OPTTS: SRN=0, SN=18, PN=0;%%
RETCODE = 0  Operation succeeded

Display OIU Port Ts Loopback Properties
---------------------------------------
TS No.  Loopback Status

1       NONE           
2       NONE           
3       NONE           
4       NONE           
5       NONE           
6       NONE           
7       NONE           
8       NONE           
9       NONE           
10      NONE           
11      NONE           
12      NONE           
13      NONE           
14      NONE           
15      NONE           
16      NONE           
17      NONE           
18      NONE           
19      NONE           
20      NONE           
21      NONE           
22      NONE           
23      NONE           
24      NONE           
(Number of results = 24)


---    END

Output Description

Domain Name	Description
TS No.	Timeslot number
Loopback Status	Loopback status (value range: NONE, LOW CHANNEL LINE, TRIBUTARY LINE, TRIBUTARY SYSTEM, SINGLE CHANNEL LOCAL, TDM REMOTE)