Display SCCP Status Between All Signaling Points(DSP SCCPOSPDSPPAIR)

Function

An OM command that queries the operating status between all the SCCP signaling points.

Note

None.

Parameters

None.

Example

Query the status of all the SCCP destination signaling points:
DSP SCCPOSPDSPPAIR;
The result is as follows:
+++    HUAWEI        2008-06-05 19:27:57
O&M    #6873
%%DSP SCCPOSPDSPPAIR:;%%
RETCODE = 0  Operation succeeded

Display SCCP Status between SP ALL Result
-----------------------------------------
DpcIndex  Dpc Status  RepDpcStatus  SccpStatus  CongestStatus

3         ALLOW    PROHIBIT      ALLOW    Normal       
(Number of results = 1)


---    END

Output Description

Domain Name	Description
DpcIndex	Keyword for identifying the destination signaling point record
Dpc Status	Specifies whether the destination signaling point is available in the signaling network"PROHIBIT" indicates that the destination signaling point is unavailable, "ALLOW" indicates that the destination signaling point is available, and "OPERATION PROHIBIT" indicates that the destination signaling point is unavailable due to manual operations.
RepDpcStatus	Indicates whether the standby destination signaling point is available in the signaling network. "PROHIBIT" indicates that the standby destination signaling point is unavailable, "ALLOW" indicates that the destination signaling point is available, and "OPERATION PROHIBIT" indicates that the destination signaling point is unavailable due to manual operations.
SccpStatus	Indicates whether the SCCP is available in the signaling network. "PROHIBIT" indicates that the SCCP is unavailable, "ALLOW" indicates that the SCCP is available, and "OPERATION PROHIBIT" indicates that the SCCP is unavailable due to manual operations.
CongestStatus	Specifies whether the signaling point is congested. "Normal" indicates that the signaling point is not congested, and "Congestioned" indicates that the signaling point is congested.