1. This command consumes certain system resources.
2. The MML client should communicate with the BSC properly.
3. The GDPUC or GDPUX should run properly.
4. This command does not apply to the BSC that adopts IP transmission on the A interface.
| ID | Name | Description |
|---|---|---|
| SRN | Subrack No. | Meaning: subrack number Value range: 0-11 Explanation: This parameter specifies the subrack number that uniquely identifies a subrack. Default value: None |
| SN | Slot No. | Meaning: slot number Value range: 0-3, 8-27 Explanation: The subrack number and slot number uniquely identify a board. Default value: None |
Query the DSP usage: DSP TC: SRN=0, SN=10; The result is as follows: %%DSP TC: SRN=0, SN=10;%% RETCODE = 0 Operation succeeded DSP TC Result ------------- DSP Channel No. State Channel Type 21 0 Blocked IDLE 21 1 Blocked IDLE 21 2 Blocked IDLE 21 3 Blocked IDLE 21 4 Blocked IDLE 21 5 Blocked IDLE 21 6 Blocked IDLE 21 7 Blocked IDLE 21 8 Blocked IDLE 21 9 Blocked IDLE 21 10 Blocked IDLE 21 11 Blocked IDLE 21 12 Blocked IDLE 21 13 Blocked IDLE 21 14 Blocked IDLE 21 15 Blocked IDLE 21 16 Blocked IDLE 21 17 Blocked IDLE 21 18 Blocked IDLE 21 19 Blocked IDLE 21 20 Blocked IDLE 21 21 Blocked IDLE 21 22 Blocked IDLE 21 23 Blocked IDLE (Number of results = 24) --- END