List Active Alarms Triggering Alarm Box(LST BOXALM)

Function

List the driving alarm of the current alarm box After the command is executed, all levels information of the driving alarm is displayed.

Note

If no audible alarm is triggered on the alarm box, the number of returned active alarms is 0.

Parameters

ID	Name	Description
BOXLOC	Alarm Box Position	Meaning: position of the alarm box Value range: loc(Local), omu(OMU) Explanation: 1. The value loc(Local) indicates that the alarm box is connected to the serial port on the local PC; the value omu(OMU) indicates that the alarm box is connected to the OMU. 2. This parameter specifies the position of the alarm box, and is used to query the record of the active alarms that trigger an audible alarm on the alarm box. Default value: loc(Local)

Name

Description

BOXLOC

Alarm Box Position

Meaning: position of the alarm box

Value range: loc(Local), omu(OMU)

Explanation:

1. The value loc(Local) indicates that the alarm box is connected to the serial port on the local PC; the value omu(OMU) indicates that the alarm box is connected to the OMU.

2. This parameter specifies the position of the alarm box, and is used to query the record of the active alarms that trigger an audible alarm on the alarm box.

Default value: loc(Local)

Example

1.List the driving alarm of the current alarm box  
LST BOXALM:BOXLOC=loc;
The result is displayed as follows:
+++    HUAWEI        2008-07-16 08:37:36
O&M    #486
%%LST BOXALM:BOXLOC=loc;%%
RETCODE = 0  Operation succeeded

ALARM  2           Fault     Critical        BSC6000   21551      Communication
     Sync serial No.  =  3
          Alarm name  =  Ater OML Broken Alarm
   Alarm raised time  =  2008-07-15 17:01:03
       Location info  =  Index No.=10,Subrack No.=12, Slot No.=25,E1/T1 Port No.=29

ALARM  3           Fault     Critical        BSC6000   21551      Communication
     Sync serial No.  =  4
          Alarm name  =  Ater OML Broken Alarm
   Alarm raised time  =  2008-07-15 17:01:03
       Location info  =  Index No.=10,Subrack No.=12, Slot No.=25,E1/T1 Port No.=39

(Number of results = 2)

---    END

Output Description

Domain Name	Description
Serial No.	Serial number of the alarm record
Alarm Type	Type of the alarm.FLT: fault alarm,EVT: event alarm
Alarm Severity	Severity of the alarm. CRITICAL: critical alarm,MAJOR: major alarm,MINOR: minor alarm,WARNING: warning
Alarm Source	Source where the alarm is generated
Alarm ID	Uniquely identifying a type of alarm
Event Type	Event type of the alarm record. power(power system), env(environment system), sig(signaling system), trunk(relay system), hardware(hardware system), software(software system), run(running system), comm(communication system), service(QoS), handle(Processing Error).
Sync serial No.	Sync serial No.
Alarm name	Alarm name
Alarm raised time	Alarm raised time
Location info	Location informaton of the alarm