An OM command that queries the CS-domain CHR configuration parameters or the PS-domain CHR configuration parameters.
| ID | Name | Description |
|---|---|---|
| CHRTYPE | CHR Type | Meaning: CHR type Value range: CS(CS CHR), PS(PS CHR) Explanation: This parameter specifies the type of the CHR object. CS(CS CHR) indicates that the CHR objects of the CS domain are queried; PS(PS CHR) indicates that the CHR objects of the PS domain are queried. Default value: None |
1. Query the CS-domain CHR configuration parameters:
LST CHRPARA: CHRTYPE=CS;
The result is as follows:
+++ HUAWEI 2008-09-11 10:48:43
O&M #241890
%%LST CHRPARA: CHRTYPE=CS;%%
RETCODE = 0 Operation succeeded
Output Information and Call Terminate Reason Parameter
------------------------------------------------------
CHR Filter Mode = Call Finish Cause Mode
CHR Output Control Mode = Call Finish Cause Mode
CHR Record Switch = CHR Allowed
Track Section Output Control = OutPut Allowed When Call Abnormal
Track Output Level = Warning Level + Error Level + Assert Level
MSID Section Output Control = OutPut Allowed
HO Resource Section Output Control = OutPut Not Allowed
Local CCB Section Output Control = OutPut Allowed
Call Time Section Output Control = OutPut Allowed When Call Abnormal
Signaling Msg section output control = OutPut Allowed When Call Abnormal
TC Info Section Output Control = OutPut Allowed When Call Abnormal
MeasurementInfo Section Output Control = OutPut Allowed
Basic Resource Section Output Control = OutPut Allowed
Normal Call Release = Disable
Successful Handover Release = Disable
No Sd Channel Resources = Enable
No Tch Channel Resources = Enable
No Abis Resources = Enable
No Ater Resources = Enable
No Tc Resource = Enable
Channel Resources Unavailable = Enable
Channel Resources Block = Enable
Abis Resources Unavailable = Enable
TC Ater Resources Unavailable = Enable
BM Ater Resources Unavailable = Enable
Requested Terrestrial Resources Unavailable = Enable
Terrestrial Circuit Already Allocated = Enable
TC Resources Unavailable = Enable
Connection Between Ater and TC Setup Fail = Enable
Connection Between TC and A Setup Fail = Enable
Connection Between Ater and Abis Setup Fail = Enable
Connection Between Ater and TC Fault = Enable
Connection Between TC and A Fault = Enable
Connection Between Ater and Abis Fault = Enable
BTS-Abis Terrestrial Circuit Fault = Enable
BM Net Setup Fail For Local Switch Start = Enable
BTS Fail For Local Switch Start = Enable
BM Net Setup Fail For Local Switch Restored = Enable
SCCP Link Abnormal = Enable
No.7 Disconnect = Enable
Terrestrial Circuit Reset = Enable
MSC Reset Indication = Enable
Establishment Indication Timeout For Immediate Assignment = Enable
Assignment Complete Timeout = Enable
Assignment Failure = Enable
Channel Mode Modify Timeout = Enable
Channel Mode Modify Nack = Enable
Handover Complete Timeout = Enable
Handover Failure = Enable
Handover Failure For Local Switch = Enable
Ciphering Mode Complete Timeout = Enable
No Measurement Report = Enable
RR Status = Enable
Abis Link Unavailable = Enable
Channel Activation Timout = Enable
Channel Activation Nack = Enable
Mode Modify Timeout = Enable
Mode Modify Nack = Enable
BTS Ciphering Algorithm not Supported = Enable
Connection Failure By BTS = Enable
Error Indication By BTS = Enable
Release Indication By BTS = Enable
Software Abnormal = Enable
Resourcese Check Error = Enable
Communication Abnormal = Enable
Flow Control = Enable
BSC Ciphering Algorithm not Supported = Enable
No Valid Speech = Enable
SMS Not Support = Enable
Message Abnormal = Enable
SAPI3 Setup Fail = Enable
GXPUM Board Fault = Enable
GXPUT Board Fault = Enable
GSCU Board For TC Fault = Enable
License Control-No Valid Speech = Enable
License Control-Num of Half Rate Channel is Exceeded = Enable
MSC Abnormal Call Release = Enable
Handover Refuse For MSC = Enable
No Response From MSC = Enable
Other Cause = Enable
HDLC Abis Link Congestion = Disable
HDLC Abis Link Fault = Disable
IP Abis State Fault = Disable
IP A State Fault = Disable
Connection Between PIUA And DSPI Fault = Disable
Connection Between DSPI And Abis Fault = Disable
Trx No Config = Disable
IP Address Between PIUA And MGW No Config = Disable
CHR Filter Mode = Call Resource Specified Mode
CHR Output Control Mode = Call Resource Specified Mode
CHR Record Switch = CHR Not Allowd
Track Section Output Control = OutPut Allowed When Call Abnormal
Track Output Level = Warning Level + Error Level + Assert Level
MSID Section Output Control = OutPut Allowed
HO Resource Section Output Control = OutPut Not Allowed
Local CCB Section Output Control = OutPut Allowed
Call Time Section Output Control = OutPut Allowed When Call Abnormal
Signaling Msg section output control = OutPut Allowed When Call Abnormal
TC Info Section Output Control = OutPut Allowed When Call Abnormal
MeasurementInfo Section Output Control = OutPut Allowed
Basic Resource Section Output Control = OutPut Allowed
(Number of results = 2)
--- END
| Domain Name | Description |
|---|---|
| CHR Filter Mode | CHR filtering mode |
| CHR Output Control Mode | Control mode of the CHR output information section. The value can be Call Finish Cause Mode or Call Resource Specified Mode. |
| CHR Record Switch | CHR switch |
| Track Section Output Control | Whether to output the CHR track section. |
| Track Output Level | CHR track output level. The value can be Info Level, Warning Level, Error Level, or Assert Level. |
| MSID Section Output Control | Whether to output the CHR MSID section. The value can be OutPut Allowed or OutPut Not Allowed. |
| HO Resource Section Output Control | Whether to output the CHR HO resource section. The value can be OutPut Allowed or OutPut Not Allowed. |
| Local CCB Section Output Control | Whether to output the CHR local CCB section. The value can be OutPut Allowed or OutPut Not Allowed. |
| Call Time Section Output Control | Whether to output the CHR call time section. The value can be OutPut Allowed or OutPut Not Allowed. |
| Signaling Msg section output control | Whether to output the CHR signaling message section. The value can be OutPut Allowed or OutPut Not Allowed. |
| TC Info Section Output Control | Whether to output the CHR TC information section. The value can be OutPut Allowed or OutPut Not Allowed. |
| MeasurementInfo Section Output Control | Whether to output the CHR measurement information section. The value can be OutPut Allowed or OutPut Not Allowed. |
| Basic Resource Section Output Control | Whether to output the CHR basic resource section. The value can be OutPut Allowed or OutPut Not Allowed. |
| CHR Filter Mode | CHR filtering mode |
| CHR Output Control Mode | Control mode of the CHR output information section |
| CHR Record Switch | CHR switch |
| Track Section Output Control | Whether to output the CHR track section. |
| Track Output Level | Output level of the CHR track |
| MSID Section Output Control | Whether to output the CHR MSID section. |
| Basic Resource Section Output Control | Whether to output the CHR basic resource section. |
| Local CCB Section Output Control | Whether to output the CHR local CCB section |
| Delay Section Output Control | Whether to output the CHR delay section |
| MeasurementInfo Section Output Control | Whether to output the CHR measurement information section |
| Normal Call Release | Whether to record the normal call release. The value can be Enable or Disable. |
| Successful Handover Release | Whether to record the successful handover release. The value can be Enable or Disable. |
| No Sd Channel Resources | Whether to record the call terminated because of no SD channel resources. The value can be Enable or Disable. |
| No Tch Channel Resources | Whether to record the call terminated because of no TCH resources. The value can be Enable or Disable. |
| No Abis Resources | Whether to record the call terminated because of no Abis resources. The value can be Enable or Disable. |
| No Ater Resources | Whether to record the call terminated because of no Ater resources. The value can be Enable or Disable. |
| No Tc Resource | Whether to record the call terminated because of no TC resources. The value can be Enable or Disable. |
| Channel Resources Unavailable | Whether to record the call terminated because of channel resources unavailable. The value can be Enable or Disable. |
| Channel Resources Block | Whether to record the call terminated because of channel resources block. The value can be Enable or Disable. |
| Abis Resources Unavailable | Whether to record the call terminated because of Abis resources unavailable. The value can be Enable or Disable. |
| TC Ater Resources Unavailable | Whether to record the call terminated because of TC Ater resources unavailable. The value can be Enable or Disable. |
| BM Ater Resources Unavailable | Whether to record the call terminated because of BM Ater resources unavailable. The value can be Enable or Disable. |
| Requested Terrestrial Resources Unavailable | Whether to record the call terminated because of unavailable terrestrial resources on the A interface. The value can be Enable or Disable. |
| Requested Terrestrial Resources Unavailable | Whether to record the call terminated because the terrestrial resources on the A interface are already allocated. The value can be Enable or Disable. |
| TC Resources Unavailable | Whether to record the call terminated because of unavailable Abis resources. The value can be Enable or Disable. |
| Connection Between Ater and TC Setup Fail | Whether to record the call terminated because of connection setup failure between Ater interface and TC. The value can be Enable or Disable. |
| Connection Between TC and A Setup Fail | Whether to record the call terminated because of connection setup failure between TC and A interface. The value can be Enable or Disable. |
| Connection Between Ater and TC Setup Fail | Whether to record the call terminated because of connection setup failure between Ater interface and Abis interface. The value can be Enable or Disable. |
| Connection Between Ater and TC Fault | Whether to record the call terminated because of connection failure between Ater interface and TC. The value can be Enable or Disable. |
| Connection Between TC and A Fault | Whether to record the call terminated because of connection failure between TC and A interface. The value can be Enable or Disable. |
| Connection Between Ater and Abis Fault | Whether to record the call terminated because of connection failure between Ater interface and Abis interface. The value can be Enable or Disable. |
| BTS-Abis Terrestrial Circuit Fault | Whether to record the call terminated because of Abis terrestrial circuit fault on the BTS side. The value can be Enable or Disable. |
| BM Net Setup Fail For Local Switch Start | Whether to record the call terminated because of network setup failure for local switch on the BM side. The value can be Enable or Disable. |
| BTS Net Setup Fail For Local Switch Start | Whether to record the call terminated because of local switch starting failure on the BTS side. The value can be Enable or Disable. |
| BM Net Setup Fail For Local Switch Start | Whether to record the call terminated because of network restoration failure for local switch on the BM side. The value can be Enable or Disable. |
| SCCP Link Abnormal | Whether to record the call terminated because of abnormal release of SCCP link. The value can be Enable or Disable. |
| No.7 Disconnect | Whether to record the call terminated because of disconnection of SS7 links. The value can be Enable or Disable. |
| Terrestrial Circuit Reset | Whether to record the call terminated because of circuit resetting on the A interface. The value can be Enable or Disable. |
| MSC Reset Indication | Whether to record the call terminated because of MSC resetting. The value can be Enable or Disable. |
| Establishment Indication Timeout For Immediate Assignment | Whether to record the call terminated because of link establishment timeout during immediate assignment. The value can be Enable or Disable. |
| Assignment Complete Timeout | Whether to record the call terminated because of assignment timeout. The value can be Enable or Disable. |
| Assignment Failure | Whether to record the call terminated because of assignment failure. The value can be Enable or Disable. |
| Channel Mode Modify Timeout | Whether to record the call terminated because of channel mode modification timeout. The value can be Enable or Disable. |
| Channel Mode Modify Nack | Whether to record the call terminated because of channel mode modification failure. The value can be Enable or Disable. |
| Handover Complete Timeout | Whether to record the call terminated because of handover timeout. The value can be Enable or Disable. |
| Handover Failure | Whether to record the call terminated because of handover failure. The value can be Enable or Disable. |
| Handover Failure For Local Switch | Whether to record the call terminated because of handover failure during local switch. The value can be Enable or Disable. |
| Ciphering Mode Complete Timeout | Whether to record the call terminated because of MS ciphering failure. The value can be Enable or Disable. |
| No Measurement Report | Whether to record the call terminated because of no measurement report on the Um interface. The value can be Enable or Disable. |
| RR Status | Whether to record the call terminated because the MS reports RR STATUS. The value can be Enable or Disable. |
| Abis Link Unavailable | Whether to record the call terminated because of Abis link fault. The value can be Enable or Disable. |
| Channel Activation Timout | Whether to record the call terminated because of BTS channel activation timeout. The value can be Enable or Disable. |
| Channel Activation Nack | Whether to record the call terminated because of BTS channel activation failure. The value can be Enable or Disable. |
| Mode Modify Timeout | Whether to record the call terminated because of BTS mode modification timeout. The value can be Enable or Disable. |
| Mode Modify Timeout | Whether to record the call terminated because of BTS mode modification failure. The value can be Enable or Disable. |
| BTS Ciphering Algorithm not Supported | Whether to record the call terminated because of unsupported BTS ciphering algorithm. The value can be Enable or Disable. |
| Connection Failure By BTS | Whether to record the call terminated because of connection failure reported by the BTS. The value can be Enable or Disable. |
| Error Indication By BTS | Whether to record the call terminated because of error indication reported by the BTS. The value can be Enable or Disable. |
| Release Indication By BTS | Whether to record the call terminated because of release indication reported by the BTS. The value can be Enable or Disable. |
| Software Abnormal | Whether to record the call terminated because of abnormal internal software of the BSC. The value can be Enable or Disable. |
| Resources Check Error | Whether to record the call terminated because of inconsistent BSC internal resources. The value can be Enable or Disable. |
| Communication Abnormal | Whether to record the call terminated because of communication failure inside the BSC. The value can be Enable or Disable. |
| Flow Control | Whether to record the call terminated because of flow control of the BSC. The value can be Enable or Disable. |
| BSC Ciphering Algorithm not Supported | Whether to record the call terminated because of unsupported BSC ciphering algorithm. The value can be Enable or Disable. |
| No Valid Speech | Whether to record the call terminated because of no valid speech version. The value can be Enable or Disable. |
| SMS Not Support | Whether to record the call terminated because the sending of SMS is not supported. The value can be Enable or Disable. |
| Software Abnormal | Whether to record the call terminated because of abnormal external message. The value can be Enable or Disable. |
| SAPI3 Setup Fail | Whether to record the call terminated because of SAPI3 connection establishment failure. The value can be Enable or Disable. |
| GXPUM Board Fault | Whether to record the call terminated because of GXPUM fault. The value can be Enable or Disable. |
| GXPUT Board Fault | Whether to record the call terminated because of GXPUT fault. The value can be Enable or Disable. |
| GSCU Board For TC Fault | Whether to record the call terminated because of GSCU fault on the TC subrack. The value can be Enable or Disable. |
| License Control-No Valid Speech | Whether to record the call terminated because of no valid speech version. The value can be Enable or Disable. |
| License Control-Num of Half Rate Channel is Exceeded | Whether to record the call terminated because the limit on the number of half-rate channels is exceeded. The value can be Enable or Disable. |
| MSC Link Abnormal | Whether to record the call terminated because of abnormal call release by the MSC. The value can be Enable or Disable. |
| Handover Refuse For MSC | Whether to record the call terminated because the handover is refused by the MSC. The value can be Enable or Disable. |
| No Response From MSC | Whether to record the call terminated because of no response from the MSC. The value can be Enable or Disable. |
| HDLC Abis Link Congestion | Whether to record the call terminated because of HDLC Abis link congestion. |
| HDLC Abis Link Fault | Whether to record the call terminated because of HDLC Abis link fault. |
| IP Abis State Fault | Whether to record the call terminated because of IP link fault on the Abis interface. |
| IP A State Fault | Whether to record the call terminated because of IP link fault on the A interface. |
| Connection Between PIUA And DSPI Fault | Whether to record the call terminated because of connection failure between PIUA and DSPI. |
| Connection Between DSPI And Abis Fault | Whether to record the call terminated because of connection failure between DSPI and ABIS. |
| Trx No Config | Whether to record the call terminated because the TRX is not configured. |
| BTS Port No Config | Whether to record the call terminated because the BTS port is not configured. |
| IP Address Between PIUA And MGW No Config | Whether to record the call terminated because the address pair between PIUA and MGWIP are not configured. |
| T3191 TimeOut | Whether to record the call terminated because of T3191 timeout. |
| T3193 TimeOut | Whether to record the call terminated because of T3193 timeout. |
| GPRS Suspended | Whether to record the call terminated because the GPRS is suspended. |
| TBF Preempted | Whether to record the call terminated because the TBF is preempted. |
| New Down Link TBF Establish | Whether to record the call terminated because of new establishment of the TBF on the downlink. |
| TS Record Error | Whether to record the call terminated because of TS record error. |
| TBF Release Suspend | Whether to record the call terminated because of TBF release suspension. |
| TBF Release Flush | Whether to record the call terminated because of TBF release . |
| Release Cause Inconsistent | Whether to record the call terminated because of inconsistent release causes. |
| Fail Cause Inconsistent | Whether to record the call terminated because of inconsistent failure causes. |
| Um Abnormal | Whether to record the call terminated because of the fault on the Um interface. |
| Wait Resource Timeout | Whether to record the call terminated because of timeout when waiting for the resources. |
| Wait MAC Ack Timeout | Whether to record the call terminated because of timeout when waiting for MAC response. |
| Wait RLC Ack Timeout | Whether to record the call terminated because of timeout when waiting for the RLC to be ready. |
| Message Error | WhetheL84r to record the call terminated because of message error. |
| ASS Queue Full | Whether to record the call terminated because the ASS queue is full. |
| T3169 TimeOut | Whether to record the call terminated because of T3169 timeout. |
| T3195 TimeOut | Whether to record the call terminated because of T3195 timeout. |
| MS No Answer | Whether to record the call terminated because of no response from the MS. |
| N3101 Overflow | Whether to record the call terminated because of N3101 overflow. |
| N3103 Overflow | Whether to record the call terminated because of N3103 overflow. |
| T3191 TimeOut | Whether to record the call terminated because of T3191 timeout. |
| Number of uplink TBF establishment failures due to MS no response | Whether to record the call terminated because of uplink TBF establishment failure due to MS no response. |
| Number of uplink TBF abnormal release due to N3101 overflow | Whether to record the call terminated because of uplink TBF abnormal release due to N3101 overflow. |
| Number of uplink TBF abnormal release due to N3103 overflow | Whether to record the call terminated because of uplink TBF abnormal release due to N3103 overflow. |
| Number of downlink TBF abnormal release due to N3105 overflow | Whether to record the call terminated because of downlink TBF abnormal release due to N3105 overflow. |
| Cell Change | Whether to record the call terminated because of change in cell. |
| Cell Not Exist | Whether to record the call terminated because the cell does not exist. |
| Cell Not Exist | Whether to record the call terminated because the cell is not working. |
| BVC Blocked | Whether to record the call terminated because the BVC is blocked. |
| Cell Deactivate | Whether to record the call terminated because the cell is deactivate. |
| PCU Cell Block | Whether to record the call terminated because the PCU cell is blocked. |
| BSC Cell Block | Whether to record the call terminated because the BSC cell is blocked. |
| TRX Not Exist | Whether to record the call terminated because the TRX does not exist. |
| PCU PDCH Block | Whether to record the call terminated because the PCU channel is blocked. |
| BSC PDCH Block | Whether to record the call terminated because the BSC channel is blocked. |
| PDCH Synchronization Fail | Whether to record the call terminated because of PDCH synchronization failure. |
| PDCH State Abnormal | Whether to record the call terminated because the PDCH is in abnormal state. |
| No TFI Resource | Whether to record the call terminated because of no TFI resources. |
| No PDCH Resource | Whether to record the call terminated because of no PDCH resources. |
| ASS Resource Abnormal | Whether to record the call terminated because the ASS resources are abnormal. |
| REASS Resource Abnormal | Whether to record the call terminated because the REASS resources are abnormal. |
| TBF Fail Due To No Channel | Whether to record the call terminated because of the TBF failure due to no channel. |
| HDLC Abis Link Congestion | Whether to record the call terminated because of HDLC Abis link congestion. The value can be Enable or Disable. |
| HDLC Abis Link Fault | Whether to record the call terminated because of HDLC Abis link fault. The value can be Enable or Disable. |
| IP Abis State Fault | Whether to record the call terminated because of IP link fault on the Abis interface. The value can be Enable or Disable. |
| IP A State Fault | Whether to record the call terminated because of IP link fault on the A interface. The value can be Enable or Disable. |
| Connection Between PIUA And DSPI Fault | Whether to record the call terminated because of connection failure between PIUA and DSPI. The value can be Enable or Disable. |
| Connection Between DSPI And Abis Fault | Whether to record the call terminated because of connection failure between DSPI and Abis interface. The value can be Enable or Disable. |
| Trx No Config | Whether to record the call terminated because the TRX is not configured. The value can be Enable or Disable. |
| BTS Port No Config | Whether to record the call terminated because the BTS port is not configured. |
| IP Address Between PIUA And MGW No Config | Whether to record the call terminated because the address pair between PIUA and MGWIP are not configured. |
| Filter Object Index | Index of the filtering object |
| Filter Object Type | Type of the filtering object |
| Filter Object Type | Type of the filtering object |
| Filter Object Index | Value of the filtering object |
| Other Cause | Whether to record the call terminated because other causes. |
| N3105 Overflow | Whether to record the call terminated because of N3105 overflow. |