An OM command that queries the data of the device IP address of a board.
To query the data of the device IP address of a board in a specific subrack, set only Subrack No..
To query the data of a specific device IP address, set Subrack No., Slot No., and Subsystem No..
| ID | Name | Description |
|---|---|---|
| SRN | Subrack No. | Meaning:Subrack No. Value range:0~11 Explanation: This parameter specifies the subrack number of an IP-based interface board. Default value:None |
| SN | Slot No. | Meaning:Slot No. Value range:0~27 Explanation: This parameter specifies the slot number of an IP-based interface board. Default value:None |
| SSN | SubSystem No. | Meaning:SubSystem No. Value range:0~4 Explanation: The GFGUG board value is 0~4, the other IP-based interface board value is 0. Default value:None |
Query the device IP address (Subrack No. = 1; Slot No. = 26):
LST DEVIP: SRN=0, SN=26;
The result is as follows:
+++ HUAWEI 2007-12-21 21:21:16
O&M #167
%%LST DEVIP: SRN=0, SN=26;%%
RETCODE = 0 Operation succeeded
Query the IP address of a board
----------
Subrack No. = 0
Slot No. = 26
Subsystem No. = 0
IP Address = 3.3.3.3
Subnet Mask = 255.255.255.0
(Number of results = 1)
--- END