Modify RET Antenna Configuration Flag(MOD ANTCFGFLAG)

Function

A configuration command that modifies the configuration switch of the RET antenna.

Note

None

Parameters

ID	Name	Description
IDXTYPE	Index Type	Meaning:Index Type Value range:BYNAME(By Name),BYIDX(By Index) Explanation:Index type. Default value:None
BTSIDX	BTS Index	Meaning:BTS Index Value range:0~2047 Explanation:This parameter specifies the index number of a BTS. Each BTS is numbered uniquely in a BSC. Default value:None
BTSNAME	BTS Name	Meaning:BTS Name Value range:1-32 characters Explanation:This parameter specifies the name of a BTS. The name of each BTS is unique in a BSC. Excluding the invalid characters ';',',','"','''','=','\','%%','+++','&','#'. Default value:None
ANTCFGFLAG	Antenna Config Allow	Meaning:Antenna Config Allow Value range:NO(NO),YES(YES) Explanation:This parameter indicates whether the RET can be configured on a site. Default value:None

Example

Modify the configuration switch of a RET antenna (Index Type = BYIDX(By Index); BTS Index = 0; Antenna Config Allow = YES(YES)):
MOD ANTCFGFLAG: IDXTYPE=BYIDX, BTSIDX=0, ANTCFGFLAG=YES;