Remote Reset BTS(RMTRST BTS)

Function

An OM command that remotely resets a specified BTS.

Note

1. The MML communicates properly with the BSC.

2. The BSC communicates properly with the BTS.

3. Resetting a BTS disrupts the services carried on it until the BTS re-runs properly, so use this command with caution.

4. The BTS3006C and the BTS3002E support this function.

Parameters

ID	Name	Description
IDXTYPE	Index type	Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None
BTSIDX	BTS Index	Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None
BTSNAME	BTS Name	Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None
CABN	Cabinet No.	Meaning: cabinet number Value range: 0-7 Description: This parameter specifies the cabinet number. Default value: None

Example

1. Remotely reset a BTS (Index type = BYIDX(By Index); BTS Index = 0; Cabinet No. = 0):
RMTRST BTS: IDXTYPE=BYIDX, BTSIDX=0, CABN=0;
2. Remotely reset a BTS (Index type = BYNAME(By Name); BTS Name = Bts312; Cabinet No. = 0):
RMTRST BTS: IDXTYPE=BYNAME, BTSNAME="Bts312", CABN=0;