Remove BSC Board(RMV BRD)

Function

A configuration command that removes a BSC board.

Note

1. This command cannot be used to remove the GTNU, GSCU, GGCU or GOMU.

2. The GTNU or GSCU that is not located in subrack 0 must be removed together with its subrack, that is, you can use the RMV BSCSUBRACK command to remove the subrack together with the GTNU or GSCU.

3. The GTNU, GSCU, GGCU, and GOMU located in subrack 0 cannot be removed.

4. If a board is configured with services, you must remove the services before removing the board.

5. If a pair of boards work in active/standby mode, they are removed at the same time.

6. If a pair of GOIUBs, GOIUPs, or GOIUTs are removed, their APS function is automatically removed.

Parameters

ID	Name	Description
SRN	Subrack No.	Meaning:Subrack No. Value range:0~11 Explanation:This parameter specifies the number of the subrack where a board is located. Default value:None
SN	Slot No.	Meaning:Slot No. Value range:0~27 Explanation:This parameter specifies the number of the slot where a board is located. Default value:None

Name

Description

SRN

Subrack No.

Meaning:Subrack No.

Value range:0~11

Explanation:This parameter specifies the number of the subrack where a board is located.

Default value:None

Slot No.

Meaning:Slot No.

Value range:0~27

Explanation:This parameter specifies the number of the slot where a board is located.

Default value:None

Example

1. Remove the BSC board (Subrack No. = 0; Slot No. = 0):
RMV BRD: SRN=0, SN=0;
2. Remove the BSC board (Subrack No. = 0; Slot No. = 14):
RMV BRD: SRN=0, SN=14;