Remove RET Antenna(RMV RATANTENNA)

Function

A configuration command that removes an RET antenna of a BTS.

Note

The DATU, GATM or the RXU board (DRRU,MRRU,MRFU,GRRU or GRFU) corresponding to the parameter Board No. must exist.

Parameters

ID	Name	Description
IDXTYPE	Index Type	Meaning:Index Type Value range:BYNAME(By Name),BYIDX(By Index) Explanation:Index type. Default value:None
BTSIDX	BTS Index	Meaning:BTS Index Value range:0~2047 Explanation:This parameter specifies the index number of a BTS. Each BTS is numbered uniquely in a BSC. Default value:None
BTSNAME	BTS Name	Meaning:BTS Name Value range:1-32 characters Explanation:This parameter specifies the name of a BTS. The name of each BTS is unique in a BSC. Excluding the invalid characters ';',',','"','''','=','\','%%','+++','&','#'. Default value:None
BRDTYPE	Board Type.	Meaning:Board Type. Value range:DATU(DATU),GATM(GATM),DRRU(DRRU),MRRU(MRRU),MRFU(MRFU),GRRU(GRRU),GRFU(GRFU) Explanation:This parameter specifies Antenna Control Board Type, and distinguishes different types of BTS boards. Each type of boards corresponds
CONTROLBRDNO	Antenna Control Board No.	Meaning:Antenna Control Board No. Value range:0~255 Explanation:This parameter specifies the number of the board that controls the RET antenna. Default value:None
ATN	Antenna No.	Meaning:Antenna No. Value range:0~35 Explanation:This parameter specifies the number of the RET antenna. Default value:None

Example

Remove an RET antenna (Index Type = BYIDX(By Index); BTS Index = 0; Board Type. = DATU; Antenna Control Board No. = 1; Antenna No. = 0):
RMV RATANTENNA: IDXTYPE=BYIDX, BTSIDX=0, BRDTYPE=DATU, CONTROLBRDNO=1, ATN=0;